Easy-Laser XT290 – Digital precision level
Description
Precision level ensures optimal machine set-up
A reliable machine installation is achieved when the foundations are correctly dimensioned and installed, and machines correctly aligned. Among other things, a measurement instrument for leveling is needed for this. Easy-Laser® XT290 Digital precision level is therefore the obvious complement to your shaft alignment system!
The Easy-Laser® XT290 digital precision level allows you to level your machines easily and reliably. Accuracy is guaranteed by the precision-ground, hardened steel base and precise electronics, the simplicity of quick stabilization and connection to our XT Alignment App.
Easy-Laser® XT190 – Belt alignment
Wireless and digital tool for alignment of sheaves/pulleys
When aligning with the Easy-Laser® XT190 you reduce the wear on sheaves/pulleys, belts, bearings and seals, and you also get lower noise and vibration levels.
The accuracy of the digital readout means that you can align within prescribed tolerances and rely on the result.
Especially transmissions with two or more belts, or wide belts, are highly affected by misalignment, causing large differences in belt tensions and also increased wear and tear on edges.
Description
The Easy-Laser® XT190 allows even more accurate and efficient alignment of sheaves/pulleys, and is unique to the market in being able to offer digital read off.
The transmitter generates a laser plane parallel to the reference sheave. The detector reads the position in relation to the laser plane and provides a live digital display of both offset and angular value. This makes the alignment of the adjustable machine very simple. The accuracy of the digital readout also means that you can align within prescribed tolerances and rely on the result.
MANY READ-OUT OPTIONS
Follow the adjustment on the integrated OLED display, in the free XT Alignment app on your phone or tablet, or on a separate Easy-Laser display unit*. The machine’s shim and adjustment values are automatically calculated. It is also possible to read off visually on targets (included).
With the XT11 display unit or mobile device, it is easy to save the data and create a PDF report.
ACCURATE AND EASY TO USE
Compared with old methods such as rulers, the alignment is more accurate and efficient when both horizontal and vertical adjustment is carried out at the same time. In addition, the work can be performed by one person alone, in a significantly shorter time.
FITS ALL TYPES OF SHEAVES/PULLEYS
The XT190 is mounted on the sheave/pulley using super magnets. It can be used on all types of sheaves/pulleys, such as v-belt, timing belt, flat belt and chain drives. If you have aluminum sheaves/pulleys, the low weight of the tool means that it can be attached using strong double-sided tape.
* Can be used with E or XT series display units (not included).
Video
Easy-Laser® XT440 – Shaft alignment
The perfect tool for basic laser shaft alignment
Easy-Laser® XT440 is a member of our Generation XT alignment systems, built upon our new cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT11.
With XT440 you can carry out the following:
- Align the machine
- Check soft foot
- Document and share the results
Description
With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software, available in 10 languages, guides you step by step through the measurement process.
Use the system together with the rugged Easy-Laser XT11 display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.
The measuring units and XT11 display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs.
UNIQUE DOCUMENTATION POSSIBILITIES
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT11 display unit it has a built-in 13MP camera. The XT11 can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.
Video
Easy-Laser® XT550 – Ex/ATEX Shaft alignment
Shaft alignment in potentially explosive areas
The Ex-approved XT550 system is developed for hazardous areas and is easily operated through our XT Alignment app. It is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery. With XT550 you can carry out the following:
- Align the machine
- Check base twist
- Check bearing play
- Check soft foot
- Document and share the results
Description
The XT550 alignment system has all the features of the XT660 with one major difference – it’s intrinsically safe and can be used in potentially hazardous areas.
The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.
CHOOSE YOUR OWN DISPLAY UNIT
System XT550 comes in two configurations; with or without the ATEX approved ecom Tab-Ex® display unit. The XT Alignment app runs on most iOS and Android units, as well as our own display unit XT11. However, those are not allowed in potentially explosive areas, but makes for a perfect complement for use in other places.
Note. For use in Ex-classed areas, the mobile device you’re using must be approved for these areas. Always check for approval labels before entering potentially explosive areas. The XT11 is not Ex/ATEX approved.
*The XT50 measuring units are ATEX approved which means means they comply with the Essential Health and Safety Requirements relating to the design of products intended for use in potentially explosive atmospheres.
Video
Easy-Laser® XT660 – Shaft alignment
More possibilities with dot laser
Easy-Laser® XT660 is the second member of our Generation XT alignment systems, built upon our new cross-platform technology. This means you will be able to display data on a multitude of different handheld devices, including our own XT11. With XT660 you can carry out the following:
- Align the machine
- Check base twist
- Check bearing play
- Check soft foot
- Document and share the resul
Description
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.
With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.
The XT products are rugged, rated both IP66 and IP67 water and dustproof. Along with long operating times, this guarantees you will be able to take on and finish even the tougher jobs.
USER-FRIENDLY
Use the rugged Easy-Laser XT11 display unit, or install the free XT Alignment app on your iOS or Android device*. The intuitive user interface guides you through the measurement process.
UNIQUE DOCUMENTATION POSSIBILITIES
The XT11 display unit has a 13MP camera. You can also get the XT11 display unit with a built-in IR camera**. This means you can add a thermal image of the machine before and after alignment. You can easily create and share a PDF report containing all measurement data and images.
* IR Camera is optional
Video
Easy-Laser® XT770 – Shaft alignment and geo applications
The complete alignment system
Easy-Laser® XT770 is the most powerful of our Generation XT alignment systems. The 360° Live feature gives you even more possibilities to perform advanced adjustments. With XT770 you can carry out the following:
- Align the machine
- Check base twist
- Check bearing play
- Check soft foot
- Measure machine movement over time
- Document and share the results
Description
With Easy-Laser XT770 you can perform shaft alignment of horizontal and vertically/flange mounted machines, but also align machine trains, measure twist of foundation, soft foot, bearing clearance, and more. The EasyTrend program allows you to keep track of machine movement over time. That is useful when checking for thermal expansion and pipe strain issues for example.
2 axis PSDs (position sensitive detectors) permit adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment. With the XT770 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.
Easy-Laser XT measuring units and display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs.
USER-FRIENDLY
Use the rugged Easy-Laser XT11 display unit, or install the free XT Alignment app on your iOS or Android device*. The intuitive user interface guides you through the measurement process.
UNIQUE DOCUMENTATION POSSIBLILITES
The XT11 display unit has a 13MP camera. You can also get the XT11 display unit with a built-in IR camera.** This means you can add a thermal image of the machine before and after alignment. You can easily create and share a PDF report containing all measurement data and images.
GEOMETRIC MEASUREMENTS KIT
With the Geo kit added to your XT770, using the Values program, you will be able to take flatness and straightness measurements with the highest reliability and precision. The kit includes the very versatile and long proven laser transmitter D22 plus geo brackets.
* IR Camera is optional
Video